JZJS series roots water ring vacuum unit

Minimum absolute suction pressure: 33hPa, 160hPa Pumping rate: 2.8~ 353m3/min Motor power: 11~ 560kW Product standard: Q/FP201.1-201.3-89 (epv DIN28431) Transmission mode: motor direct connection, motor belt drive

Key words:

Category:

Classic Case

Tel:

+86-533-4403088

Contact

Message

JZJS series roots water ring vacuum unit

Details

Minimum absolute suction pressure: 33hPa, 160hPa
Pumping rate: 2.8~ 353m3/min
Motor power: 11~ 560kW
Product standard: Q/FP201.1-201.3-89 (epv DIN28431)
Transmission mode: motor direct connection, motor belt drive

Uses and Features:

Water ring vacuum pumps and compressors are high-efficiency and energy-saving products developed by our company combined with the advanced technology of imported products from Germany.

This series of pumps is a single-stage single-acting structure, which has the advantages of simple structure, convenient maintenance, reliable operation, and high efficiency and energy saving. Compared with the SK, 2SK, and SZ series water ring vacuum pumps widely used in China, it has significant advantages such as high vacuum degree, low power consumption, and reliable operation. It is an ideal replacement for SK, 2SK, and SZ series water ring vacuum pumps.

The water ring compressor is a low pressure compressor. When used as a compressor, the exhaust pressure is about 0.1MPa. Please refer to the sample for detailed parameters.

The main features of the water ring vacuum pump and compressor produced by our company are as follows:

All bearings are imported from NSK or NTN, which ensures the precise positioning of the impeller of the 2BE1 vacuum pump and high stability during operation.

The impeller materials are all made of ductile iron casting or steel plate welding, which fully guarantees the stability of the 2BE1 vacuum pump impeller under various harsh working conditions, and greatly improves the service life of the 2BE1 vacuum pump.

The pump body is all made of steel plate, which improves the service life of the 2BE1 vacuum pump.

The bushing of 2BE1 vacuum pump is the most easily damaged part. The company is all made of high-chromium stainless steel, which is 5 times longer than that of ordinary materials.

The pulley (belt drive) adopts the standard high-precision cone sleeve pulley, which has reliable operation, long belt life and convenient disassembly.

The coupling (direct drive) adopts standard high-strength elastic coupling, and the elastic element is made of polyurethane, which has stable and reliable operation and long service life.

The unique top-mounted gas-water separator saves space and effectively reduces noise.

All castings are made of resin sand casting, and the surface quality is good. The surface of the casting does not need to be greasy, so that the 2BE1 vacuum pump has the best heat dissipation effect.

All mechanical seals (optional accessories) are imported parts, which fully guarantees that the 2BE1 series vacuum pump has no leakage during long-term operation.

None

无