PRODUCTS CENTER

Cameroon VDP series variable pitch screw vacuum pump

Cameroon 2BE1 series water ring vacuum pump and compressor

Cameroon 2BE3 series water ring vacuum pump and compressor

Cameroon 2BV series water ring vacuum pump and compressor

Cameroon Y, 2SY series liquid ring compressor shrinking machine

Cameroon 2BED two-stage high-efficiency water ring vacuum pump

Cameroon JZJD series roots screw vacuum unit

Cameroon JZJ2B series roots-water ring vacuum unit

JZJ2B series Roots water ring unit is an air pumping unit composed of ZJY type Roots pump as the main shaft pump, 2BV/2BE1 series water ring pump or Roots-water ring unit as the front stage pump.

Category:

CameroonJZJ2B series roots-water ring vacuum unit

Inquire

Product Description

overview

JZJ2B series Roots water ring unit is an air pumping unit composed of ZJY type Roots pump as the main shaft pump, 2BV/2BE1 series water ring pump or Roots-water ring unit as the front stage pump. In addition to being used to pump general gases, it can also pump gases containing moisture, organic solvents or a small amount of dust. Compared with general mechanical vacuum pumps, it is not afraid of oil pollution, water vapor and fine dust. Compared with general water ring vacuum pumps, it has the characteristics of high vacuum degree and large pumping speed under high vacuum degree conditions.

Because the JZJ2B series vacuum unit adopts the high-efficiency and energy-saving 2BV series water ring pump as the front-stage pump, the JZJ2B series vacuum unit has the advantages of high efficiency, compact structure and no leakage compared with the JZJ2S series (the 2BV pump is a mechanical seal design, which is different from the 2SK series). Packing seal), corrosion resistance (2BV adopts stainless steel or aluminum bronze impeller), and high protection level.

The Roots vacuum pump adopts the ZJY series Roots vacuum pump developed by the company. The company adopts lip seal or mechanical seal for the sealing of the pump cavity and the bearing cavity, which can achieve zero leakage of the medium. The pump oil does not emulsify during the process of removing a large amount of water vapor and various solvents.

Technical performance parameters

Unit model	Pump model		pumping speedL/s	Maximum suction pressurePa	Ultimate pressure (absolute pressure)		Total powerKW
	main pump	Front stage pump			Water ring unit	Oil ring unit
JZJ2B15-2	ZJY-15	2BV2060	15	8000	267	80	1.65
JZJ2B30-2	ZJY-30	2BV2061	30	8000			2.25
JZJ2B30-1	ZJY-30	2BV5110	30	12000			4.75
JZJ2B70-2	ZJY-70	2BV5110	70	6000			5.5
JZJ2B70-1	ZJY-70	2BV5111	70	12000			7
JZJ2B150-2A	ZJY-150	2BV5111	150	6000			8.5
JZJ2B150-2B	ZJY-150	2BV5121	150	8000			10.5
JZJ2B150-1	ZJY-150	2BV5131	150	10000			14
JZJ2B300-2A	ZJY-300	2BV5131	300	4000			15
JZJ2B300-2B	ZJY-300	2BV5161	300	5000			19
JZJ2B300-1	ZJY-300	2BE1 202	300	10000			26
JZJ2B600-2A	ZJY-600	2BE1 202	600	4000			27.5
JZJ2B600-2B	ZJY-600	2BE1 203	600	5000			42.5
JZJ2B600-1	ZJY-600	2BE1 252	600	12000			50.5
JZJ2B1200-2A	ZJY-1200	2BE1 252	1200	2500			56
JZJ2B1200-2B	ZJY-1200	2BE1 253	1200	4000			86
JZJ2B1200-1	ZJY-1200	2BE1 303	1200	8000			121
JZJ2B2500-2	ZJY-2500	2BE1 303	2500	3000			132
JZJ2B30-2.1	ZJY-30	ZJY-15/2BV2061	30	8000			2.8
JZJ2B70-2.1	ZJY-70	ZJY-30/2BV5110	70	6000			6.25
JZJ2B150-2.1	ZJY-150	ZJY-70/2BV5111	150	6000			10
JZJ2B150-4.1	ZJY-150	ZJY-30/2BV5110	150	3000	25	0.8	7.75
JZJ2B300-2.1	ZJY-300	ZJY-150/2BV5131	300	5000			18
JZJ2B300-2.2	ZJY-300	ZJY-150/2BV5121	300	4000			14.5
JZJ2B300-4.1	ZJY-300	ZJY-70/2BV5111	300	2000			11
JZJ2B600-4.1	ZJY-600	ZJY-150/2BV5131	600	1500			21.5
JZJ2B600-2.2	ZJY-600	ZJY-300/2BV5161	600	2000			26.5
JZJ2B1200-4.2	ZJY-1200	ZJY-300/2BV5161	1200	1000			34
JZJ2B1200-4.1	ZJY-1200	ZJY-300/2BE1 202	1200	1200			41
JZJ2B1200-2.2	ZJY-1200	ZJY-600/2BE1 203	1200	2500			59.5
JZJ2B1200-2.1	ZJY-1200	ZJY-600/2BE1 252	1200	3000			67.5
JZJ2B2500-4.1	ZJY-2500	ZJY-600/2BE1 252	2500	1000			74.5
JZJ2B30-2.1.1	ZJY-30	ZJY-15/ ZJY-15/2BV2061	30	8000	0.5	0.05	3.35
JZJ2B70-2.2.1	ZJY-70	ZJY-30/ ZJY-15/2BV2061	70	4000			4.3
JZJ2B70-2.1.1	ZJY-70	ZJY-30/ ZJY-30/2BV5110	70	6000			7
JZJ2B150-2.2.1	ZJY-150	ZJY-70/ ZJY-30/2BV5110	150	3000			9.25
JZJ2B300-2.2.1	ZJY-300	ZJY-150/ ZJY-70/2BV5111	300	3000			14
JZJ2B300-4.2.1	ZJY-300	ZJY-70/ ZJY-30/2BV5110	300	1200			10.25
JZJ2B600-2.2.1	ZJY-600	ZJY-300/ ZJY-150/2BV5131	600	2500			25.5
JZJ2B600-4.2.1	ZJY-600	ZJY-150/ ZJY-70/2BV5111	600	1200			17.5
JZJ2B1200-4.2.1	ZJY-1200	ZJY-300/ ZJY-150/2BV5131	1200	1000			33
JZJ2B2500-4.2.1	ZJY-2500	ZJY-600/ ZJY-300/2BE1 202	2500	1000			55.5
JZJ2B5000-4.2.1	ZJY-5000	ZJY-1200/ ZJY-600/2BE1 252	5000	800			104.5
JZJ2B10000-4.2.1	ZJY-10000	ZJY-2500/ ZJY-1200/2BE1 303	10000	800			202

Note:

1. The above table is the recommended standard series. Due to different working conditions in actual production and application, the inhalation gas and pressure will change a lot. Therefore, the selection should be based on the actual pumping process, gas release process, condensable gas condensation situation, The time change of suction pressure, etc. is checked and calculated or selected with reference to the use of existing equipment.

2. For the technical indicators of a single pump, please refer to the parameter table of each pump.

3. The maximum suction pressure refers to the highest pressure that the main pump can start. If it runs for a long time above this pressure, it will cause the main pump to be overloaded.

4. If the vacuum pump motor, electric contact vacuum meter and electric control cabinet need explosion-proof, please indicate when ordering, the 2BV2 series in the above table is correspondingly changed to 2BV2-Ex series, and the 2BV5 series is correspondingly changed to 2BV6 series.

Precautions for Roots unit selection

1. Understand the composition of the pumped gas. The gas contains no condensable vapor, no particulate dust, and no corrosion. When choosing a vacuum pump, you need to know the gas composition and choose the corresponding pump for the pumped gas. If the gas contains vapor, particles and corrosive gases, you should consider installing auxiliary equipment on the air inlet pipeline of the pump, such as condensers, dust collectors, etc.

2. The working pressure of the Roots vacuum unit should meet the ultimate vacuum and working pressure requirements of the vacuum equipment. For example, a vacuum drying process requires a working pressure of 10mmHg (absolute pressure), and the ultimate pressure of the selected vacuum pump should be at least 2 mmHg, preferably less than 1 mmHg. Usually the ultimate pressure of the pump is selected to be an order of magnitude higher than the working pressure of the vacuum equipment.

3. Correctly select the working point of the Roots vacuum unit. The normal working range of the Roots vacuum unit is the maximum suction pressure~ ultimate pressure × 5. Example: JZJ2B150-2.1 The normal working range of the Roots water ring vacuum unit is: 6000Pa~ 125 Pa, the working range is the normal working pressure range after the main pump is turned on, and the unit has the best efficiency within this working range.

4. The vacuum unit should be able to drain all the gas generated during the vacuum equipment process under its working pressure.

5. Select the appropriate unit configuration according to the actual working conditions. For example: the maximum pumping rate and ultimate pressure of the JZJ2B300-4.1 unit and the JZJ2B300-2.1 unit are the same, but the difference is that their working range and power consumption are different. The normal working range of the JZJ2B300-4.1 unit is 2000 Pa~ 125 Pa, while the normal working range of the JZJ2B300-2.1 unit is 5000 Pa~ 125 Pa. Obviously the normal working range of the JZJ2B300-2.1 unit is wider, but the power consumed is also larger. If it can be confirmed that the working pressure of the pumped system is < 2000 Pa, the JZJ2B300-4.1 unit should be preferred to save energy. However, if the unit is required to have a strong pre-pumping capacity for the system and the unit needs to work at a higher pressure for a long time, it is more appropriate to choose a JZJ2B300-2.1 unit with a larger front pump.